Factory-direct-hardware Von Duprin 22EOF4 Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 12
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
911333_00(9) Page 6 of 12
3
Cut device if necessary.
If using ALK exit alarm option, install
ALK cover plate before cutting device.
NOTE
!
Tape
Cover plate
Pushbar
Cover plate flush
with end of pushbar
A
B
Measure from
inside of stop
Measure
from strike
Measure from end of center case cover
(not from tip of latch bolt)
4
Prepare door for device.
3.1. Device length A must be at least 1-1/2” shorter than B .
3.2. If necessary, cut device so A is at least 1-1/2” shorter than B .
RHR shown
LHR opposite
4.1. Cut center case template for 1409/1439
strike or for 299/299F/499F strike.
4.2. Tape center case template to inside of door
aligned with center line C as shown.
4.3. Mark and prepare holes per template.
4.4. Prepare door for outside trim (see trim
instructions).
299/299-F/499-F Strike 1409/1439 Strike
L
C
L
C
Place cut edge of
template against stop
L
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios