Factory-direct-hardware Hansgrohe 10458 Axor Starck Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
2
Axor Starck Free-Standing Tub Filler
10458XX1
Technical Specification
Maximum water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Maximum hot water temp. 176
o
*
Recommended hot water temp 120
o
- 140
o
*
Max. flow rate @ 45 psi 5.8 gpm
Rough-in 10452181 must be installed and the floor finished and made watertight before the tub
filler can be installed.
This tub filler is not anti-scald. If anti-scald capability is desired, or is required by local plumbing
codes, install remote pressure balancing valve 13418181 to the hot and cold supplies before they
go into the 10452181 rough-in.
The handshower is protected against back siphonage with a check valve, located in the hand-
shower outlet on the tub filler. The check valve should be inspected and cleaned yearly.
Tub filler 10458XX1 is listed by Underwriters Laboratories.
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater
Vista de pagina 1
1 2 3 4 5 6 7 ... 23 24

Comentarios a estos manuales

Sin comentarios