Factory-direct-hardware Hansgrohe 39115 Manual de usuario

Axor Citterio39115XX1Installation Instructions / Warranty

10Limited Lifetime Consumer WarrantyThis product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”).

11this warranty extends for as long as you own the product and the home in which the product is originally installed. If you purchased the product fo

Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004Tel. 770 360-9880 • Fax 770 360 9887www.hansgrohe-USA.comUS - Installation Instr

2Axor Citterio Wall-Mount Lavatory Trim39115XX1Technical DataMax. water pressure 145 psiRecommended pressure 14.5 - 72 psiRecommended hot water tem

3Installation InstructionsTurn off the water at the supply before beginning the installation.Remove the caps from the plaster shields. Cut the plaste

4Install the springs and cup washers in the valve body. Install the cartridge assembly.Install the handle. Tighten the set screw using the en-closed

5If the distance is 3 9/16” – 3 15/16”, select the two “A” sleeves (1-1/4” long).If the distance is 4” – 4 1/4”, select the two “B” sleeves (7/8” lo

6Measure the distance from the outside surface of the finished wall to the spout port (“X”). Add 2” to X.Measure the spout connector. Using proper t

7Use the service key to tighten the escutcheon retain-ers against the plate.Lightly coat the threads on the flanges with the includ-ed lubricant. Scr

8User InstructionsLift the handle to turn the faucet on. Pivot the handle to the left for warmer water, to the right for cooler water. Push the hand

9Replacement Parts1 flange 96908XX02 handle 39092XX03 flange for handle 96912XX04 flange for spout 97695XX05 face plate 96914XX06 cartridge