Factory-direct-hardware Hansgrohe 39116 Manual de usuario descargar pdf (Pagina 2)

Citterio Wall-Mount Lavatory Trim

39115XX1











Technical Data

Maximum incoming water pressure 145 psi

Recommended incoming pressure 14.5 - 72 psi

Recommended hot water temperature 120

F - 140

Flow rate 2.2 gpm

The hot and cold supplies must be of equal pressure for proper operation of the faucet.

*Know and follow all applicable local codes when setting the temperature of the water heater.

Installation Considerations

· Rough-in 38111181 (purchased separately) must be installed and the finished wall

complete before installation of this trim kit.

· For best results, Hansgrohe recommends installation by a licensed, professional

plumber.

· No drain is included with this faucet. Contact the manufacturer of the sink for

recommendations regarding suitable drains.

· Turn the water off at the main before beginning installation.

Recommended tools (not included)

27 mm & 17 mm deep sockets

12 mm allen wrench

Teflon

thread tape

cutting tools

waterproof bathroom sealant, compatible with the wall surface

1 2 3 4 5 6 7 ... 11 12

Sin comentarios

Factory-direct-hardware Hansgrohe 39116 Manual de usuario Pagina 2