Factory-direct-hardware Hansgrohe 14314 Talis C Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
6
Remove the plaster shield from the spout tee.
Remove the brass plug from the tee.
Three-hole models only:
Lightly lubricate the o-rings on the sealing ring us-
ing white plumbers grease.
Press the sealing ring into the spout tee.
Firmly press the spout over the sealing ring until it is
fully seated.
Tighten the screw using a 3 mm Allen wrench.
Do not overtighten the
screw.
Overtightening the screw
will deform the o-rings,
causing a leak.
3 mm
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentarios a estos manuales

Sin comentarios