Factory-direct-hardware Hansgrohe 10135 Manual de usuario descargar pdf (Pagina 2)

Starck widespread lavatory faucet

10135XX1

Technical Specification

Maximum water pressure 145 psi

Recommended water pressure 14.5 - 72 psi

Maximum hot water temp. 176

Recommended hot water temp 120

- 140

Max. flow rate @ 45 psi 2.2 gpm

Max. deck thickness 1 3/8”

Hole size in deck valves 1 1/4”

spout 1 3/8”

Installation considerations:

This unit requires 1/2” supply lines and

nuts, which are not included.

*Many municipalities require that the water heater be set no

higher than 120

. Please know and follow all

applicable plumbing codes when setting the temperature on

the water heater.

Installation Instructions

• Push the valve up through the hole in

the mounting surface. Thread the

mounting ring with o-ring on as far as

it will go.

• Pull downward on the valve until the

mounting ring is seated firmly on the

countertop. -Tighten the tensioning

screws.

1 2 3 4 5 6 7 8

Sin comentarios

Factory-direct-hardware Hansgrohe 10135 Manual de usuario Pagina 2