Factory-direct-hardware Hansgrohe 39410 Axor Citterio Manual de usuario descargar pdf (Pagina 4)

Installation Considerations

• This unit requires a 3/4” female pipe fitting, recessed 3/8” behind the surface of the

finished wall.

• Tools required: 12 mm Hex wrench (not included; available at auto parts stores); 3 mm

hex wrench (included), Teflon

tape, waterproof bathroom sealant.

Installation Instructions

• Seal the wall around the female pipe fitting

using a good quality waterproof bathroom

sealant.

• Wrap the mounting piece clockwise with 2-3

layers of good quality plumbers’ thread tape.

• Screw the mounting piece into the pipe

fitting. Tighten with the 12 mm Hex wrench.

Do not overtighten! The mounting piece

should extend 1 - 1 1/4” outside the surface

of the finished wall.

• Slide the escutcheon over the mounting

piece, with the retaining pin on the top.

• Slide the tub spout over the mounting piece

until flush with the escutcheon.

• Secure the tub spout to the mounting piece

with the set screw, using the 3 mm Hex

wrench.

Starck Tub Spout

10410XX1

1 2 3 4 5 6 7 8

Sin comentarios

Factory-direct-hardware Hansgrohe 39410 Axor Citterio Manual de usuario Pagina 4