Factory-direct-hardware Hansgrohe 06438 Manual de usuario descargar pdf (Pagina 2)

Installation

Unscrew the handshower holder escutcheon. Remove the

insert. Put both pieces in a safe place.

Interaktiv Hose Pull-Out Set

06438XXX

Technical Specification

Maximum mounting surface thickness 1 1/2"

Hole size in mounting surface 1 1/2"

Protection against back siphonage provided by a check

valve installed in the elbow.

Installation Consideration:

The mounting surface must be complete and made water-

tight prior to installation of this unit.

Place the handshower holder and sealing ring in place on

the mounting surface (1).

From below the mounting surface, install the friction washer,

metal washer, and mounting nut (2).

Tighten the mounting nut (3). Tighten the tensioning screws

(4).

1 2 3 4 5 6 7 8

Sin comentarios

Factory-direct-hardware Hansgrohe 06438 Manual de usuario Pagina 2