Factory-direct-hardware Hansgrohe 04170 Solaris E Manual de usuario descargar pdf (Pagina 7)

Install the pin on the diverter.

Install the spout escutcheon.

Firmly press the spout over the tee and diverter.

Tighten the screw with the included 3 mm Allen

wrench.

CAUTION: do not overtighten the screw or the o-

rings on the diverter will deform, which will cause

a leak.

Install the pull rod. The threaded end of the pull

rod must go into the hole in the pin.

Press the diverter firmly into the spout tee until it is

fully seated.

Turn the pin so that the hole faces the rear of the

spout.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sin comentarios

Factory-direct-hardware Hansgrohe 04170 Solaris E Manual de usuario Pagina 7